welded wire screen trap for filtration

Welded wire screen traps are placed in a housing inline with the flow to capture expensive media. We can design the traps to capture media particles as small as 100 microns. With the continuous open slot, the traps provide sufficient open area to let process flow move effectively. 

The wedge wire element in a Resin Trap/ Strainer is normally a slot tube, but can also be a cylinder. A Resin Trap / Strainer is normally closed on one side and has a flange on the other. They can be made for flow-in-to-out (FITO) or flow-out-to-in (FOTI) filtration.

Principle: A resin trap/strainer normally serves to retain particles in a process flow. The quantity of particles is normally very low, so that cleaning can be done during flow interruption.

Feature of welded wire screen trap for filtration

Our company produces stainless steel wire around a resin trap filter to overcome these shortcomings, high capture efficiency, the flow area, good mechanical strength, pressure small.As ion exchanger resin trap equipment, for the recovery of ion - exchange resin in the operation of the equipment running leaks, the device small size, recovery and high efficiency.Resin trap is mainly used for water device for ion - exchange water cap export to prevent interception resin leaking effluent device failure to protect subsequent normal operation of equipment and use.

Application of welded wire screen trap for filtration

Food & Beverage Screens
Mineral & Aggregate Processing
OEM Screen Components
Pulp & Paper Screens
Refining & Petrochemical
Water Process & Fluid Treatment
Water/oil Well