YUBO is a leading manufacturer in wedge wire screen products.

Stainless Steel Wedge Wire Lauter Tun Screen False Bottom

More Views

Stainless Steel Wedge Wire Lauter Tun Screen False BottomStainless Steel Wedge Wire Lauter Tun Screen False BottomStainless Steel Wedge Wire Lauter Tun Screen False Bottom

Stainless Steel Wedge Wire Lauter Tun Screen False Bottom

Category:Wedge Wire Screen Panel
Material:Stainless steel 304,304L,304HC,316,316L,321,430 or as per your request.
Properties:Lauter tun screen
Application:Filters, strainers, architectural screens, water treatment underdrains, media support grids and overlays, infiltration gallery screens

if you are interested in receiving more information or have a question with our products, please fill out the form above and we will contact you within 24-48 hours.

Skype:Enla

Details of Stainless Steel Wedge Wire Lauter Tun Screen False Bottom

The stainless steel wedge wire lauter tun screen is made by wrapping and welding stainless steel V-shaped profile wire cylindrically around support rods under automatic wire screen machine, then be made to screen panel through cutting and edge welding. Each profile wire and support rod is welded by resistance welding. It generally made of stainless steel 304, 304L,316, 316L, 321 etc. We also produce special material according to the customer request.

The stainless steel wedge wire false bottom are the most commonly using screen for filtration and separation in liquid/gas, water wasting, mining, food and so on. We have flat type, cylinder type, basket type and slope type according to the screen type. These products also can be called flat welded screen panel, cylinder wedge screen and sieve bend screen.


stainless steel wedge wire lauter tun screen false bottom
 

 

How does Wedge Wire Lauter Tun Screen Work

 

In the lautering process, the wort (the liquid containing the sugar extracted during mashing) is separated from the grains. This is done either in a lauter tun outfitted with a false bottom or in a mash filter.

Most separation processes have two stages: first wort run-off, during which the extract is separated in an undiluted state from the spent grains, and sparging, in which extract which remains with the grains is rinsed off with hot water.

The lauter tun false bottom is designed to hold back the large bits of grist and hulls. The bed of grist that settles on it is the actual filter. Lauter tuns have provisions for rotating rakes to cut into the bed of grist to maintain good flow. When the process is complete, a plow can be dropped to drive the spent grain out of the vessel.


Advantages of Wedge Wire Lauter Tun Screen

 

1) Continuous slot screens, stronger and more durable

2) More open area, very precise openings

3) Virtually non-clogging and reduce media abrasion

4) Easier installation and long-term operating and cost benefits

stainless steel wedge wire lauter tun screen false bottom

Specifications of Stainless Steel Wedge Wire Lauter Tun Screen False Bottom:

stainless steel wedge wire lauter tun screen false bottom

Specification (wedge wire):

Width(mm): 1.50 1.80 2.30 3.00 3.30 3.70

Height(mm): 2.20 2.50 2.70 3.60 4.30 4.70 5.60 6.30 7.00

Specification (support rod):

Width(mm): 2.30 3.00 3.30 3.70

Height(mm): 2.70 3.60 4.70 5.60 6.30

Note: other specifications available as per request

Slot Size

0.10, 0.15, 0.20, 0.25, 0.30…… 6.00mm also achieved upon request.

Material:

galvanized low carton (LCG), stainless steel (304,316 etc.)

Diameter

from 25mm to 1200mm.

End Connection

Plain beveled ends, flanged or threaded couplings

 

Packaging and Transportation of Stainless Steel Wedge Wire Lauter Tun Screen False Bottom:

Orders and Returns

If you are interested in receiving more information or have a question regarding any of our products. Please fill out the form below and we will contact you within 24-48 hours.

You may also be interested in the following product(s)

Skype
Message
Email
Contact Us
Name:Anna
Tel:+86 311 8595 5658