Wedge wire lauter tun screen used for beer brewry

Wedge wire lauter tun screen used for beer brewry consist of profile wire and support rods with the materials of galvanized steel, low carbon steel and stainless steel 304, 316. Wedge wire screen can apply in chemical, oil, gas, food or beverage, waste water management, mining or coal separation. Whatever your application is, we can provide you with OEM wedge wire screen products as your own requirement, including the material, the width, the length, the shape and other special rquire.

Wedge wire lauter tun screen used for beer brewry

In the lautering process, the wort (the liquid containing the sugar extracted during mashing) is separated from the grains. This is done either in a lauter tun outfitted with a false bottom or in a mash filter. Most separation processes have two stages: first wort run-off, during which the extract is separated in an undiluted state from the spent grains, and sparging, in which extract which remains with the grains is rinsed off with hot water. The lauter tun false bottom is designed to hold back the large bits of grist and hulls. The bed of grist that settles on it is the actual filter. Lauter tuns have provisions for rotating rakes to cut into the bed of grist to maintain good flow. When the process is complete, a plow can be dropped to drive the spent grain out of the vessel.

Usages of Wedge wire lauter tun screen used for beer brewry

Itis screen panel is used in the field of sugar juice filtration, waste water treatment, crude oil and natural gas production and vessel internals solving problems of solid / liquid and solid / gas separation; filtration of oils, greases, paints, food products, fuels, liquid cooling agents, chemicals etc.